RC Series＜Deflector Cap(Vent to Atmosphere, Low Pressure)＞

■ Available for restriction of discharge direction by deflector cap

■Control contamination by foreign substances into the valve under outdoor exposure use

■High-precision cracking performance and high sealing performance

■Adjust set pressure at the factory

Operation fluid	Gases / liquids that do not corrode wetted parts
Pipe size	R1/8～R3/4
Proof pressure	1.62MPa
Set pressure	30～1080kPa ※It for pipe size 1/8 is from 30～970kPa.
Body material	Brass （Ni plating）/ SUS316
Seal material	Fluororubber FKM (Standard)
Remarks	■OUT port direction is upward. ■Body material for Brass is Ni Plating. ■Please contact us for pipe size 1".

<mm>

Pipe size(R)	A	B	HEX	No.	Name	Material
Pipe size(R)	A	B	HEX	No.	Name	Brass[B]	Stainless[T]
1/8	26.5 ±2.0	18.0	13.0	①	Body	Brass(Ni plating)	SUS316
1/4	32.0 ±2.0	25.0	17.0	②	Nut	SUS316L
3/8	34.0 ±2.0	32.5	19.0	③	Guide	Brass or Stainless	SUS316 or SUS316L
3/8	34.0 ±2.0	32.5	19.0	④	Spring	SUS304　or　SUS316
1/2	45.8 ±3.0	37.2	26.0	⑤	Poppet	Brass	SUS316
1/2	45.8 ±3.0	37.2	26.0	⑥	Special Seal	FKM[V](Standard)
3/4	53.4 ±3.0	37.2	29.0	⑦	Cap	Aluminum alloy (anodized)
3/4	53.4 ±3.0	37.2	29.0	⑧	Screw	SUS304 or SUS316